Back to 3G.co.uk homepageSearch the whole 3G.co.uk websiteVisit 3G.co.uk's own mobile phone store for great deals3G phone reviews and the latest 3G phones here3G Forum for help and advice about all things 3GAll about 3G in the UK - latest news and phonesAll about 3G around the world - latest news and phonesAll about 4G - news and latest developmentsAll about WiMax - latest news and developments
Today's 3G News
3G Sponsored by SPIRENT
Find out how Spirent's test systems can accelerate your development of 3G devices.
Master Your 3G Network Challenges with Tektronix
Master Your 3G Network challenges with Tektronix' UTRAN Network & Service Analyser.
Test With The Best - Catapult
Catapult test solutions for Protocol Analysis – Protocol Monitoring –

Mobile Measurement of DVB Network Coverage

29 November , 2005

Europe Germany : The new DVB-T Diversity Test Receiver R&S TSM-DVB has been designed for mobile coverage measurements in DVB-T networks. Up to now, broadcasters have performed stationary measurements but mobile measurements are also necessary – especially in digital networks. To meet this need, the handy instrument from Rohde & Schwarz is now available in combination with Coverage Measurement Software R&S ROMES. In a moving vehicle, it provides information about the transmitter signal quality. In addition, coverage and potential error sources can be clearly displayed on a notebook, quickly and economically.

Network coverage in digital TV networks is normally measured in accordance with the CCIR guidelines. To do this, you set up a 10 m high antenna at a test station. A test thus involves an enormous effort and, above all, a lot of personnel. In addition, digital networks require other coverage measurement methods, especially reception tests while the vehicle is moving. The DVB-T Diversity Test Receiver R&S TSM-DVB meets these requirements. During a mobile measurement, it provides quick and reliable measurement values even if the test vehicle reaches speeds of up to 100 km/h. The test system supports all DVB-T modes including the hierarchical modes across all bandwidths of 6 MHz, 7 MHz or 8 MHz. The test instrument is equipped with two antenna inputs and two demodulation channels. Due to its power supply of 12 V, it can be easily connected to a vehicle at any time.

A PC or a notebook equipped with an RS-232-C interface and based on Windows XP Professional is all you need to evaluate the measurement. This means that the data can be gathered during a simple drive and subsequently analyzed by specialists. The R&S TSM-DVB supports measurement parameters such as RF level, modulation error ratio (MER), packet error ratio (PER), bit error ratio (BER) in accordance with Reed-Solomon and C/(N+i) as well as several status indicators (AGC locked, carrier locked, MPEG sync locked, etc) or information about the transport signal (DVB-T mode, code rate, etc).

The DVB-T Diversity Test Receiver R&S TSM-DVB and Coverage Measurement Software R&S ROMES are now available from Rohde & Schwarz.

Great Deals on the Latest 3G Handsets
Great Deals on the Latest 3G Handsets